Can You Fit 37S on a 6 Inch Lift Silverado

It’s a common question among Silverado truck owners- can you fit 37 inch tires on a 6 inch lift? The answer is yes, but there are a few things to keep in mind. First, your truck will be higher off the ground and may require some adjustments to the suspension.

Second, you’ll need to make sure the tires clear the fenders and don’t rub when turning. And lastly, you might have to trim the plastic on the bottom of the truck bed for tire clearance. But overall, it’s definitely possible to fit 37s on a 6 inch lift Silverado.

  • This is a difficult task that will require the use of a few tools and some patience
  • First, remove the old shocks from the truck using a wrench or socket set
  • Next, install the new shocks in their place, making sure to tighten them securely
  • Once the new shocks are in place, it is time to install the lift kit
  • Start by installing the front leveling kit, then move on to the rear
  • Finally, test out the truck to make sure everything is working properly before hitting the road!

Will 37S Fit on a 6 Inch Lift

37s on a 6 inch lift is possible, but may not be ideal. It all depends on your Jeep’s specific dimensions and how much tire you want to stuff under there. You also have to consider suspension articulation and drivetrain clearance when running big tires.

If you’re looking for maximum ground clearance and the ability to crawl over any obstacle, 37s on a 6 inch lift may be for you. But if you’re just looking for a little bit of extra height and don’t plan on doing any hardcore off-roading, you might be better off sticking with smaller tires.

How Big of a Lift Kit Do I Need for 37S?

If you have a truck or SUV with 37-inch tires, you’ll need a lift kit that can provide at least 6 inches of clearance. Some kits can provide up to 8 inches of ground clearance, but these are typically more expensive and may require additional modifications to your vehicle. If you’re not sure how big of a lift kit you need, it’s always best to consult with a professional before making your purchase.

Can You Fit 35 Inch Tires on a 6 Inch Lift?

35 inch tires can fit on a 6 inch lift, but with some modifications. The main modification would be to the suspension, as the taller tires would put more stress on the components. Another modification that might be necessary is to the fenders and wheel wells, as they need to be slightly larger to accommodate the larger tires.

Overall, it is possible to fit 35 inch tires on a 6 inch lift, but it may not be ideal for everyone.

Can You Fit 37S on a 4 Inch Lift F250?

Assuming you have a 4×4 truck, the largest tire you can fit on a 4″ suspension lift is a 37″ tire. Any taller and the tire will rub on the suspension components or body of the truck. The width of the tire also comes into play – too wide and it will rub on the fenders or frame.

So, in short, yes, you can fit 37s on a 4″ lifted F250.

Can You Fit 37S on a 4 Inch Lift Ram 2500?

If you’re looking to fit 37-inch tires on your Ram 2500, you’ll need a 4-inch lift kit to give you the clearance you need. You may also need to do some trimming of your fenders and bumper to avoid any rubbing. With the right lift kit installed, your Ram 2500 will be able to handle those big tires with no problem.


If you’re looking to fit 37-inch tires on your 6-inch lifted Silverado, you might be out of luck. Most experts recommend a minimum 8-inch lift for 37s. However, there are a few things you can do to try and make it work.

First, you’ll need to trim the fenders and plastic inner liners. You may also need to do some serious modifications to the suspension and drivetrain components to make everything fit properly. In the end, it’s probably not worth the hassle unless you’re an experienced off-roader who knows exactly what they’re doing.

Leave a Comment

Your email address will not be published. Required fields are marked *