Can You Use a Torque Wrench As a Breaker Bar

Yes, you can use a torque wrench as a breaker bar. Torque wrenches are designed to apply a specific amount of torque to a fastener, and they usually have a much higher torque capacity than breaker bars. However, using a torque wrench as a breaker bar can damage the tool and void the warranty.

  • Select the appropriate size of torque wrench for the job
  • Place the torque wrench on the bolt or nut that needs to be loosened
  • Apply pressure to the handle of the torque wrench until the desired amount of torque has been reached
  • Hold the handle of the torque wrench in place and use your other hand to remove the bolt or nut

Torque wrench – Breaker Bar?

Can a Torque Wrench Be Used to Loosen Bolts

A torque wrench is a powerful tool that can be used to loosen or tighten bolts. While it is possible to use a torque wrench to loosen bolts, it is not recommended as it can damage the threads on the bolt. If you must use a torque wrench to loosen a bolt, make sure to set it to a lower setting than what is required to tighten the bolt.

Can You Use a Torque Wrench As a Breaker Bar


What Can I Use Instead of a Breaker Bar?

When it comes to working on your car, a breaker bar is an essential tool. But what if you don’t have one? Can you use something else in its place?

The answer is yes, but it’s not going to be as easy as using a breaker bar. You’ll need to use a wrench or socket that fits snugly onto the bolt or nut that you’re trying to loosen. Then, use a piece of pipe or another long, sturdy object to give you extra leverage.

It’s important that whatever you use is long enough so that you don’t put too much strain on your arms and back. And make sure that the wrench or socket is firmly attached before applying any pressure – otherwise you could end up breaking something else! If all else fails, you can always try heating up the bolt or nut with a torch.

This will expansion and hopefully make it easier to loosen. Just be careful not to overdo it and melt anything nearby!

What Should You Not Do With a Torque Wrench?

One of the most important tools in any mechanic’s toolbox is a torque wrench. Used properly, a torque wrench can help ensure that bolts are tightened to the correct specification, which can prevent issues like leaks, breakages and other problems. However, there are some things that you should never do with a torque wrench, as doing so can damage the tool or cause injury.

Here are four things you should never do with a torque wrench: 1. Use It As A Hammer A torque wrench is not a hammer and should never be used as one.

Doing so can damage the internal mechanism of the wrench and make it inaccurate. If you need to loosen a stubborn bolt, use a separate hammer or impact wrench. 2. Drop It

Like any precision instrument, a torque wrench is sensitive to impacts and dropping it can damage it internally. If you drop your torque wrench, have it checked by a professional before using it again. 3. Over-tighten Bolts

A torque wrench is designed to tighten bolts to a specific level of tightness – no more, no less. Over-tightening bolts can strip threads, break bolts and cause other problems. Always follow the manufacturer’s instructions when using your torque wrench and don’t try to exceed the specified level of tightness.

4 .Use It On Rusted Bolts Using a torque wrench on rusted or corroded bolts can damage the internals of the tool or cause it to slip off the bolt head, potentially causing injury.

How Do You Use a Wrench As a Cheater Bar?

A wrench, also called a spanner, is a tool used to provide grip and mechanical advantage in applying torque to turn objects—usually rotary fasteners, such as nuts and bolts—or keep them from turning. A wrench is usually operated by hand, and is an essential tool in most forms of industry and consumer repairs. There are many different types of wrenches available on the market today, each designed for specific purposes.

However, one type of wrench that can be used for a variety of tasks is the cheater bar. A cheater bar is simply an extension of the handle on a wrench that gives the user more leverage when tightening or loosening a bolt or nut. This makes it an ideal tool for those who need extra torque but don’t have the strength to use a regular wrench.

To use a cheater bar, simply slip the extended handle over the head of your wrench and position it so that you have maximum leverage. Then apply pressure to the handle just as you would with a regular wrench. The extra leverage provided by the cheater bar will make it easier to loosen or tighten even stubborn bolts and nuts.

When using a cheater bar, be sure to take care not to damage the surfaces around the bolt or nut you’re working on. Also be aware that using too much force can cause stripped threads or breakage, so use caution when applying pressure with your cheater bar-extended wrench.

Is It Ok to Use a Torque Wrench As a Ratchet?

A torque wrench is a tool used to apply a specific amount of torque to a fastener, and is usually used in situations where precise torque is critical. For example, when assembling an engine, it is important to tighten bolts to the correct level of torque so that they do not come loose over time. A torque wrench ensures that this precise level of torque is applied.

However, a torque wrench should not be used as a ratchet. A ratchet is designed for high-speed, low-torque applications such as quickly removing or tightening nuts and bolts. Applying too much force with a ratchet can damage the fastener or the tool itself.

In contrast, a torque wrench is designed for low-speed, high-torque applications and applying too much force could cause the bolt to break or strip its threads. Therefore, it is best to use the correct tool for each application to avoid damaging your materials or injuring yourself.


A torque wrench is a precision instrument that is used to apply a specific amount of force to a nut or bolt so that it can be tightened to the correct level. A breaker bar is a much more brute force tool that is used to break loose stubborn nuts and bolts. While you can use a torque wrench as a breaker bar, it is not recommended as you can damage the delicate internals of the torque wrench.

Leave a Comment

Your email address will not be published. Required fields are marked *