Can You Use Dex Cool in a Ford

Yes. Dex-Cool is an ethylene glycol based coolant that can be used in any engine, provided the correct mix ratio is used. It is important to check your owner’s manual for the specific coolant ratio recommended by the manufacturer.

  • Check your coolant level and add Dex Cool as needed
  • The coolant should be at the “full” line on the overflow tank
  • Fill the overflow tank to the “full” line with a 50/50 mixture of water and Dex Cool
  • Start the engine and let it idle for a few minutes
  • Turn on the heater to max heat and blower on high
  • Shut off the engine and let it cool completely

Bill explains the real story about DEXCOOL

What Coolant is Compatible With Dex-Cool

When it comes to coolant, there are a lot of options on the market. But if you have a car that uses Dex-Cool, you need to be careful about which coolant you use. Not all coolants are compatible with Dex-Cool, and using the wrong kind can damage your engine.

So, what is Dex-Cool? It’s a type of antifreeze/coolant that was developed by General Motors in the 1990s. It’s made with an organic acid technology (OAT) that makes it more durable and longer lasting than traditional antifreeze.

Dex-Cool is also supposed to be compatible with all types of engines, including aluminum ones. However, there have been some issues reported with Dex-Cool. Some people say that it can cause corrosion and leaks in engines, especially those made with aluminum.

There have even been lawsuits filed against GM over these alleged problems. If you have a car that uses Dex-Cool, it’s important to be careful about which coolant you use. Make sure to read the labels carefully and only buy coolant that is specifically marked as being compatible with Dex-Cool.

Using the wrong kind of coolant could end up costing you a lot of money in repairs down the road.

Can You Use Dex Cool in a Ford


Is It Ok to Use Dexcool in a Ford?

Yes, you can use Dexcool in a Ford. In fact, many people do and have had great results. There are a few things to keep in mind when using it, however.

First, Dexcool is designed for long-term use and will last longer than standard coolants. This means that you won’t have to change it as often, which can save you money in the long run. Second, because Dexcool is designed for long-term use, it’s important to make sure that your cooling system is clean before using it.

If there’s any dirt or debris in your system, it could clog up the dexcool and cause problems. Finally, be sure to follow the instructions on the packaging carefully. If you don’t mix the coolant correctly or don’t add enough of it, it won’t work as well as it should.

Is Gm Dexcool the Same for Ford?

GM Dexcool and Ford coolant are not the same. While both are ethylene glycol based coolants, they have different additives. The main difference is that GM Dexcool contains silicates to protect against corrosion, while Ford uses borate.

The two should not be mixed, as it can cause clogging and reduced effectiveness. If you need to top up your coolant, make sure to use the correct type for your vehicle.

Is Dexcool the Same As Motorcraft Orange?

No, Dexcool is not the same as Motorcraft Orange. Dexcool is a coolant used in GM vehicles that is orange in color. Motorcraft Orange is a coolant used in Ford vehicles that is also orange in color.

The two coolants are not interchangeable and should not be mixed.

What Type of Antifreeze Does Ford Use?

The type of antifreeze used in Ford vehicles is called Ford Blue Oval Coolant/Antifreeze. It is a pre-diluted, ethylene glycol based coolant that contains corrosion inhibitors. It is recommended for use in all Ford vehicles.


Yes, you can use Dex Cool in a Ford. Dex Cool is a coolant that is designed for use in all makes and models of cars. It is a good idea to check with your local Ford dealer to see if they recommend using Dex Cool in your car.

Leave a Comment

Your email address will not be published. Required fields are marked *