How to Bypass Cranking Time Exceeded

How to Bypass Cranking Time Exceeded

If your Ford vehicle is displaying a “Cracking Time Exceeded” message, it means that the engine has been idling for too long and needs to be reset. This can happen if you leave your car parked for extended periods of time, or if you let it idle for too long while waiting in line or in traffic. Fortunately, resetting the engine is a quick and easy process.
To reset the engine, simply turn off the ignition and then restart the car. The “Cracking Time Exceeded” message should no longer be displayed. If it does reappear, you may need to drive the car around for a bit to get the engine properly warmed up. There are several things you can do to bypass the cranking time exceeded error message and get your car started.

How Do You Bypass Cranking Time Exceeded

First, check the battery. If the battery is dead, or close to dead, it will need to be replaced or recharged. If the battery is not the problem, check the starter. The starter may be faulty and need to be replaced.
If the battery and starter are both working properly, there may be an issue with the fuel system. Check the fuel pump and make sure it is receiving power and that there is fuel in the tank. If these things check out, there could be a problem with the ignition system.

If your car has a cranking time exceeded error, there are a few things you can do to bypass it

  1. Check the battery terminals
  2. Make sure they are clean and free of corrosion
  3. Check the starter solenoid
  4. Make sure it is getting power and that the connections are clean and free of corrosion
  5. Try starting the car with the accelerator pedal pressed down halfway
  6. This can often bypass the cranking time exceeded error

How Do You Remove Cranking Time Exceeded?

If your car has been cranking for longer than usual, it may be due to a problem with the starter, battery, or ignition system. If the engine is still not starting, you may need to replace the starter or battery. If the engine is starting but stalling soon after, the problem may be with the ignition system.

How Long Does Crank Time Exceeded Last?

Crank time exceeded is a situation where the engine is cranked for too long without starting. This can damage the starter, battery, and other engine parts. Crank time exceeded usually lasts for a few seconds to a minute.


If your car won’t start, it may be because of cranking time exceeded. This can happen if the starter is not getting enough power or if the battery is low. if you facing this kind of problem then I would suggest you to follow the process I discussed in above.

Leave a Comment

Your email address will not be published. Required fields are marked *