How to Change Car Battery Without Losing Settings

If your car has an on-board computer, you’ll need to take it to a dealership or certified mechanic to have the battery changed. If your car doesn’t have an on-board computer, you can change the battery yourself without losing any settings.

  • Park your car in a safe and level location
  • Turn off the engine and remove the key from the ignition
  • Locate the battery under the hood of your car
  • It is usually located near the front of the engine compartment on one side or the other
  • Disconnect the negative terminal first by loosening the nut or bolt with a wrench and then removing the cable clamp from the terminal post
  • Disconnect the positive terminal next by loosening the nut or bolt and removing the cable clamp from 5the terminal post
  • You may see a spark when you do this, so be careful not to touch anything metal while disconnecting this cable since it will be live with electricity until it is fully disconnected from both ends
  • Removethe old battery from its holder by lifting it out (be careful not to drop it since it is heavy)
  • Place 6the new battery in its holder and reconnect both terminals following steps 3 and 4 in reverse order
How to Change Car Battery Without Losing Settings


How Do I Keep My Settings on When I Change Car Battery?

If you’ve ever had to change a car battery, you know that it can be a pain to have to reset all your settings. Here’s a quick and easy guide on how to keep your settings when you change your car battery. First, it’s important to know which settings are stored in the car’s battery.

The most common ones are the clock, radio presets, and seat memory positions. If your car has other features that are powered by the battery, like heated seats or a remote start system, those will need to be reset as well. Now that you know what needs to be preserved, here’s how to do it:

1. Disconnect the negative (black) terminal of the old battery first. This is important because it helps prevent any potential electrical sparks. 2. Once the old battery is disconnected, remove it from the vehicle and put in the new one.

Make sure all the connections are tight so there’s no risk of them coming loose while driving. 3. Reconnect the negative terminal of the new battery and then move on to the positive (red) one. Again, make sure everything is tight and secure before continuing.

How Do You Change a Car Battery Without Losing Presets?

There are a few things you need to do in order to change a car battery without losing presets. First, you need to find the right size battery for your car. Second, you need to disconnect the negative cable from the old battery and then connect it to the new battery.

Third, you need to connect the positive cable to the new battery. Finally, start your car and let it idle for a few minutes so that the new battery can charge.

Do You Really Need a Memory Saver When Changing Car Battery?

When you disconnect the battery in your car, you can lose all sorts of important data. This includes the clock settings, radio presets, and even your power seat position. To avoid having to re-enter all this information, you can use a memory saver.

A memory saver is a device that plugs into your cigarette lighter socket and retains the electrical current from the battery. This way, when you reconnect the battery, all your settings will still be in place. Memory savers are especially useful if you need to disconnect the battery for any length of time, such as when changing it out.

Do note that a memory saver won’t work if your car doesn’t have a cigarette lighter socket or if it’s been damaged. Also, make sure to remove the memory saver before starting up your car – otherwise, it could damage your electrical system.

Will Disconnecting Car Battery Harm Computer?

If you disconnect your car battery, it shouldn’t harm your computer. Your computer is likely powered by a 12 volt DC power supply, while your car battery is a lead-acid battery that produces around 14 volts. So, as long as you don’t connect the two directly together, you should be fine.

However, there are a few things to keep in mind. First, if your computer is running on its own internal battery (like a laptop), make sure that the battery is fully charged before disconnecting the car battery. Otherwise, you may lose any unsaved work.

Second, if your computer relies on any accessories that are powered by the car’s electrical system (like a GPS unit), those accessories will no longer work once you disconnect the car battery. So, you’ll need to take care of them separately.

How to Change the Car Battery without losing the settings

Change Car Battery Without Memory Saver

If your car battery dies, it can be a real pain to get it replaced. Not only do you have to find a new battery, but you also have to worry about losing all your stored data. But what if I told you that there was a way to change your car battery without losing any of your stored data?

That’s right – with a memory saver! A memory saver is a small device that plugs into your car’s cigarette lighter and provides power to the car’s computer while the battery is being changed. This means that all your stored data – like your radio presets and seat position – will stay intact.

And best of all, it’s easy to use! Just plug it in and let it do its thing. So next time your car battery dies, don’t panic – just grab a memory saver and you’ll be back up and running in no time!


If your car battery dies, you may be worried about losing all of your settings. However, there is no need to worry! You can easily change your car battery without losing any of your settings.

To do this, simply disconnect the old battery and connect the new one in its place. Then, start your car and let it run for a few minutes. This will allow the new battery to charge and all of your settings will be retained.

Leave a Comment

Your email address will not be published. Required fields are marked *