How to Fix Code U0107

If your car is displaying the code U0107, it means that there is a problem with the communication between the Transmission Control Module (TCM) and the Engine Control Module (ECM). This can be caused by a number of things, but the most common cause is a bad connection or ground. If you’re experiencing this problem, here’s how you can fix it.

  • The first step is to check all of the fuses in the vehicle
  • If any of the fuses are blown, replace them with new ones
  • Next, check all of the relays in the vehicle
  • If any of the relays are bad, replace them with new ones
  • Finally, check all of the wiring harnesses in the vehicle
  • If any of the wiring is damaged, repair or replace it as necessary

U0107 Code Honda Accord

If your Honda Accord is displaying the error code U0107, it means that there is a problem with the vehicle’s throttle position sensor. This sensor is responsible for relaying information to the engine control unit about the position of the throttle. When it fails, the engine may run erratically or stall altogether.

There are a few things that can cause the throttle position sensor to fail. One is simply age and wear – over time, these sensors can become less accurate. Another possibility is damage from an accident or other external force.

If you suspect your sensor may be failing, it’s important to have it checked out by a professional as soon as possible. In most cases, replacing the throttle position sensor will solve the problem. However, if there is underlying damage to other parts of the system (such as wiring), more extensive repairs may be necessary.

What Does Engine Code U0107 Mean?

If your check engine light is on and you’ve determined that the code U0107 is stored, it means that the powertrain control module (PCM) has detected a problem with the throttle position sensor signal. The throttle position sensor is located on the throttle body and measures how far open the throttle plate is. The PCM uses this information to determine how much fuel to inject and how much spark to fire.

If there’s an issue with the signal from the throttle position sensor, it can cause all sorts of drivability problems including a stumble on acceleration, loss of power, and poor fuel economy. In order to fix this problem, you’ll need to diagnose and repair whatever is causing the issue with thethrottle position sensor signal. This could be a problem with the actual sensor itself, or it could be an electrical issue further down the line such as a loose connection or damaged wiring.

Once you’ve repaired whatever is causing the problem, you can clear the code and see if it comes back.

What Causes Throttle Actuator Control?

The throttle actuator control system in your vehicle is responsible for regulating the amount of air that flows into the engine. This system is made up of a few different components, including the throttle body, throttle position sensor, and accelerator pedal position sensor. The throttle body is what controls the actual airflow into the engine, while the sensors provide input to the computer about how much air should be flowing based on your current driving conditions.

There are a few different things that can cause problems with the throttle actuator control system. One common issue is a dirty or faulty throttle position sensor. This sensor can get gummed up over time from dirt and debris, which can cause it to give inaccurate readings to the computer.

Another possibility is an issue with the wiring harnesses or connectors between the various components. If any of these become damaged or corroded, it can disrupt communication and cause problems with the system. If you’re having issues with your throttle actuator control system, it’s important to have it checked out by a qualified mechanic as soon as possible.

They will be able to diagnose the problem and make any necessary repairs.

How Do You Reset a Tac Module?

If your TAC (telephone access controller) module isn’t functioning properly, you may need to reset it. To do this, you’ll first need to unplug the power cord from the back of the TAC module. Next, remove the cover from the unit and locate the reset button on the circuit board.

Press and hold this button for about 10 seconds, then replace the cover and plug the power cord back in. The TAC module should now be reset and working properly.

Where is the Tac Module Located?

The TAC module is located in the front of the vehicle, on the driver’s side. It houses the fuse box and various relays.


If your car is displaying the error code U0107, it means that there is a problem with the communication between the TCM (transmission control module) and the PCM (powertrain control module). There are a few things you can do to try and fix this problem: 1. Check all of the fuses related to the TCM and PCM – if any of them are blown, replace them.

2. Make sure all of the connections to the TCM and PCM are secure. 3. Try resetting both the TCM and PCM – this can sometimes clear up communication issues. 4. If none of those things work, you may need to replace either the TCM or PCM (or both).

Leave a Comment

Your email address will not be published. Required fields are marked *