How to Fix Service Park Assist System

Service park assist system is a safety feature that helps the driver to park the car in a safe and accurate manner. This system uses sensors to detect the presence of other cars or objects around the car and then sends signals to the steering, brakes, and transmission to help control the car while parking. If your service park assist system is not working properly, there are a few things you can do to fix it.

  • Check for any visible damage to the sensors or wires
  • If there is no visible damage, check the fuse associated with the service park assist system
  • If the fuse is blown, replace it with a new one of the same amperage
  • If the fuse is not blown, check for power at the sensor using a multimeter
  • If there is no power at the sensor, check for continuity between the sensor and ground using a multimeter
  • If there is continuity between the sensor and ground, replace the sensor

What Does Service Park Assist System Mean

Most newer cars come with some form of automatic parking system, but what does service park assist system mean? This is a type of automated parking system that helps the driver to parallel park or reverse into a parking spot. The car will use sensors to determine the size of the space and then guide the driver into it.

This can be a great feature for those who are not confident in their ability to parallel park or who find it difficult to judge distances when reversing.

How Do I Reset My Park Assist Sensor?

If your Park Assist sensor is not working properly, you may need to reset it. To do this, first park your car in a safe location and turn off the engine. Next, locate the Park Assist sensor on the front or rear of your vehicle.

There will be a small button on the sensor that you can press to reset it. Once the sensor has been reset, you should test it by driving slowly in reverse and then forward to see if it is working properly.

What Does It Mean When Your Car Says Service Parking Assist?

If you see the message “Service Parking Assist” on your car’s display, it means that there is a problem with the system that helps you park your car. This system uses sensors to help you judge how close you are to other objects when parking. When the system is not working correctly, it can be more difficult to park your car safely.

If you see this message, it is important to take your car to an authorized dealer or service center as soon as possible so that they can diagnose and fix the problem. In the meantime, you may need to park your car manually, using only your mirrors and judgement to guide you. This can be more challenging, so take extra care when parking until the issue is resolved.

How Do I Disable Service Parking Assist?

If your car has service parking assist, it means that it has a feature that will help you park in tight spots. But if you find that this feature is getting in the way, or if you just don’t want to use it, there are some steps you can take to disable it. First, check your owner’s manual.

There may be specific instructions on how to disable service parking assist in your car. If not, there are a few things you can try. One option is to disconnect the battery.

This will reset all the electronic features in your car, including service parking assist. However, it’s important to note that this will also erase any other settings in your car (like your radio presets) so only do this if you’re okay with losing those things. Another option is to look for a switch or button labeled “service parking assist” and turn it off.

This should deactivate the feature without having to reset anything else in your car. If you can’t find a switch or button, there’s one final thing you can try: put your car into “valet mode.” This setting is usually found in the infotainment system of newer cars, and it disables various features like service parking assist while still allowing the car to be driven safely.

How Much Does It Cost to Fix a Park Assist Sensor?

The cost of repairing a park assist sensor will vary depending on the severity of the damage and the make and model of your vehicle. Generally, you can expect to pay between $100 and $200 for this repair. If your park assist system is not working correctly, it is important to have it checked by a qualified mechanic as soon as possible to avoid any further damage.


If your car has a service park assist system and it isn’t working properly, there are a few things you can do to try and fix the problem. First, check the fuse for the system. If it is blown, replace it with a new one.

Next, check the wiring harness for any loose or damaged wires. If you find any, repair or replace them as needed. Finally, check the sensors that are used by the system to see if they are dirty or damaged.

Clean or replace them as necessary. If all of these things fail to fix the problem, then you may need to take your car to a mechanic to have them diagnose and repair the issue.

Leave a Comment

Your email address will not be published. Required fields are marked *