How to Remote Start a Chevy Equinox

If you have a Chevy Equinox from the 2010 model year or newer, then you’re in luck. You can add a remote start system to your vehicle relatively easily. Here’s a quick guide on how to do it.

First, find a remote start system that is compatible with your Chevy Equinox. There are many different brands and models out there, so do some research to find the best one for your needs. Once you have the remote start system, follow the installation instructions that come with it.

In most cases, you will need to wire the system into your vehicle’s electrical system. If you’re not comfortable doing this yourself, take it to a professional installer. Once the remote start system is installed, test it out to make sure it works properly.

Then enjoy the convenience of being able to remotely start your Chevy Equinox!

  • Locate the Chevy Equinox’s remote start button, which is usually located on the key fob
  • Press and hold the remote start button for three to five seconds
  • The engine should start and the parking lights will turn on to indicate that the car is in remote start mode
  • If the engine doesn’t start, try pressing and holding the button for a longer period of time or consult your owner’s manual for troubleshooting tips
  • Once the engine is running, you can release the remote start button and use the car as normal
  • To turn off the engine, simply press and hold the button again for three to five seconds

How to Remote Start Chevy Equinox 2022

If you’re like most people, the thought of remote starting your car on a cold winter morning is very appealing. But if you’ve never done it before, the process can seem a bit daunting. Luckily, we’re here to help!

Here’s everything you need to know about how to remote start your Chevy Equinox 2022. The first thing you’ll need to do is purchase a remote starter kit specific for your vehicle. Once you have that, follow these simple steps:

1) Park your Chevy Equinox in the garage or another protected area. 2) Connect the remote starter kit to your vehicle according to the instructions. 3) Use the key fob to activate the remote start feature.

4) Let the engine run for a few minutes so it has a chance to warm up. Then, simply drive away and enjoy the warmth of your heated seats and steering wheel!

How Do You Remote Start a Car With a Chevy Equinox Key Fob?

Assuming you have a Chevy Equinox with the necessary equipment installed, you can remote start your car in the following way: 1. Make sure your key fob has fresh batteries. 2. Press and hold the lock button on your key fob for about five seconds.

3. With the lock button still held down, press and release the panic button. You should see the parking lights flash and hear the car’s engine start running. 4. To turn off the engine, simply press and release the panic button again.

How Do You Remote Start a 2019 Chevy Equinox?

Assuming you are asking about the 2019 Chevy Equinox with keyless start: To remote start your car, if it is equipped with the keyless feature, simply press and hold the “Lock” button on your key fob for about two seconds. Then press and hold the “Start” button until the engine starts.

You can also use the My Chevrolet mobile app to remote start your car.

How Do I Know If My Chevy Equinox Has Remote Start?

If your Chevy Equinox has remote start, you will be able to start it from outside the vehicle. To do this, you will need to have the key fob with you. Once you are within range of the vehicle, press and hold the remote start button for three seconds.

The engine should then start and the parking lights will turn on. You can also tell if your Chevy Equinox has remote start by looking for a button that says “Remote Start” on the key fob.

How Do You Start a 2018 Chevy Equinox Remote?

Assuming you would like a step-by-step guide on how to start your Chevy Equinox remotely: 1. Sit in the driver’s seat and close all doors. 2. Insert the key into the ignition cylinder and turn it to the “On” position without starting the engine.

This will activate all electronic components and allow the remote to communicate with the car. 3 If your Chevy Equinox is equipped with passive entry, hold the fob next to the start button (typically located on the steering column or dash). If your vehicle is not equipped with passive entry, press both the lock and unlock buttons simultaneously for two seconds then release.

4 Press and hold the start button until the engine starts. If successful, you’ll see “Started Remotely” message appear on either your instrument panel display or infotainment system screen.

How to Set Up Remote Window Operation and Remote Start in the Chevy Equinox


If you’re looking toremote start your Chevy Equinox, there’s a few different ways you can go about it. You can either purchase an aftermarket remote starter kit and install it yourself, or you can have your local Chevrolet dealership do it for you. If you opt to do it yourself, there are a few things you’ll need to keep in mind.

First, make sure that your vehicle is compatible with the remote starter kit. Secondly, follow the instructions that come with the kit carefully so that you don’t damage any wires or components while installing it. And finally, test the system thoroughly before using it on a regular basis.

If everything goes smoothly, you should be able to remotely start your Chevy Equinox without any issues!

Leave a Comment

Your email address will not be published. Required fields are marked *