The smog pump on a Chevy is responsible for circulating fresh air through the engine to help reduce emissions. If your vehicle is not running properly, it may be time to remove the smog pump. This can be done at home with a few tools and some patience.
- Disconnect the negative battery cable
- Drain the coolant from the radiator into a clean container
- Remove the drive belt by loosening the adjusting bolt and sliding the belt off of the pulleys
- Unplug the electrical connector from the smog pump
- Remove the two bolts that secure the smog pump to the bracket using a socket wrench and remove the pump fromthe vehicle
Smog Pump Delete Benefits
If you own a car made in the last 20 years, chances are it has a smog pump. And if you live in an area with especially dirty air, that smog pump works overtime to try and keep your car’s engine clean. But what exactly is a smog pump and what are the benefits of deleting it?
A smog pump is basically a pollution control device that helps reduce emissions from an engine. By circulating fresh air through the engine, the smog pump helps remove contaminants before they can be released into the atmosphere.
While most cars come equipped with a smog pump, there are some benefits to deleting it.
For one, it can help improve your car’s performance by freeing up horsepower that was being used to power the smog pump. Additionally, eliminating the smog pump can also help reduce weight and simplify your car’s engine bay.
How Do You Change a Smog Pump?
A smog pump, also called an air injection pump, is a device that forces fresh air into the exhaust system of a vehicle to help reduce pollution. The smog pump is usually located near the front of the engine and is driven by a belt from the engine.
To change a smog pump, first identify the type of smog pump your vehicle has.
There are two common types: mechanical and electrical. Once you know which type you have, follow these steps:
For a mechanical smog pump:
1) Disconnect the negative battery cable to prevent electrocution.
2) Remove the drive belt from the pulley on the front of the smog pump. This will require loosening or removing other belts in some cases.
3) Unbolt the smog pump from its mounting bracket using a wrench or socket set. Some pumps may have additional bolts holding them in place; remove these as well.
4) Pull the old smog pump out of its mount and discard it.
If necessary, clean up any debris left behind before installing the new one.
What Happens When You Remove a Smog Pump?
When you remove a smog pump, the engine will run leaner because there is less air being drawn into the combustion chamber. This can cause the engine to overheat and damage the catalytic converter.
Will a Car Run Without a Smog Pump?
No, a car will not run without a smog pump. The smog pump is responsible for circulating air through the catalytic converter in order to reduce emissions.
Where is the Smog Pump Located?
The smog pump is located in the engine compartment, usually on the driver’s side. It is a small, round, black device that has a hose attached to it. The other end of the hose is connected to the car’s exhaust system.
The smog pump helps to reduce emissions by pumps polluted air out of the engine and into the atmosphere.
Conclusion
If you need to remove the smog pump on your Chevy, there are a few things you’ll need to do. First, disconnect the negative battery cable. Next, loosen the power steering pump pulley bolts and remove the belt from the pulley.
Then, remove the two bolts that secure the smog pump to the bracket and pull the pump off. Finally, disconnect the electrical connector and vacuum hose from the back of the pump and you’re all set!
