If you find that your car is making a lot of noise when going over bumps, it may be time to replace the lower control arm bushings. Bushings are made of rubber and act as cushions between metal parts. Over time, they can wear out and need to be replaced.
This is a relatively easy repair that can be done at home with a few tools.
- Remove the two bolts that secure the lower control arm to the frame of the vehicle using a socket wrench
- Pull the lower control arm down and away from the frame
- Remove the old bushing from the control arm using a pry bar or similar tool
- Install the new bushing in the control arm
- Reattach the lower control arm to the frame and tighten the bolts securely
Front Lower Control Arm Bushings Repair Cost
If you’re hearing a creaking noise coming from your car’s front end, it might be time to replace your lower control arm bushings. These bushings connect the control arm to the chassis of your car, and over time they can wear down and break. Replacing them is not a difficult job, but it will cost you some money.
On average, lower control arm bushing replacement costs between $200 and $400. This includes the cost of parts and labor. The exact price will depend on the make and model of your car as well as the severity of the damage.
You can save some money by doing the job yourself, but it’s best to leave it to a professional if you’re not confident in your abilities.

Credit: www.youtube.com
Can You Just Replace Control Arm Bushings?
If your car is experiencing issues with its control arm, you may be wondering if you can simply replace the bushings. The answer is yes, in most cases you can replace just the bushings. However, there are a few things to keep in mind before doing so.
First, it’s important to know what type of bushing your car has. There are two main types of control arm bushings: rubber and polyurethane. Rubber bushings are typically found on older cars, while polyurethane bushings are more common on newer vehicles.
If you’re not sure which type of bushing your car has, consult a mechanic or look up your car’s specifications online.
Second, keep in mind that replacing just the bushings is usually a temporary fix. Over time, the new bushings will likely wear down and need to be replaced again.
It’s generally best to replace the entire control arm assembly (including both the bushing and the control arm itself) for a more permanent solution.
Third, consider whether you have the skills and knowledge to replace the bushings yourself. Replacing control arm bushings is not a difficult task, but it does require some mechanical know-how.
If you’re not confident in your abilities, it’s best to leave this job to a professional mechanic.
Taking all of these factors into account, replacing just the control arm bushings is typically only recommended as a temporary fix or for those who are confident in their mechanical abilities. For most people, it’s best to replace the entire control arm assembly for a more permanent solution.
How Long Does It Take to Replace Lower Control Arm Bushings?
Assuming you are referring to changing the bushings on a car, it would take anywhere from 1-2 hours. This is assuming that you have all the tools and equipment needed as well as knowledge on how to do so. If you need to take your car to a mechanic, it would depend on their availability and how busy they are.
It could take a few days or even weeks.
How Do You Press in New Control Arm Bushings?
Assuming you are referring to press-in style control arm bushing:
You will need a few tools to get the job done including a hydraulic press, a pickle fork, and some form of drift punch. You will also need some form of bushing driver that matches the ID of your new bushing.
Many companies make these drivers specifically for this purpose.
Start by removing the old bushing from the control arm. This can be done by using the pickle fork to pry it out or by using a drift punch to drive it out from one side.
Once the old bushing is removed, clean up any rust or debris in the housing so that the new bushing will have a smooth surface to sit on.
Next, apply some lubricant to both sides of the new bushing. This will help it slide into place more easily and also reduce noise once everything is put back together.
Place the new bushing into the housing and use your chosen driver tool to press it fully into place.
That’s it! You’ve now successfully pressed in a new control arm bushing.
How Do You Remove Control Arm Bushings Without a Press?
Assuming you are referring to control arm bushing on a vehicle:
The first step is to remove the control arm. This can be done by removing the bolts that connect it to the frame of the car.
Once the control arm is removed, the bushing can be pried out with a screwdriver or other tool. If the bushing is stuck, it may need to be heated up with a torch before it can be removed.
Once the old bushing is out, the new bushing can be put in place and the control arm can be bolted back onto the car.
How to Replace Control Arm Bushings (EASY)
Conclusion
If your car is starting to make creaking noises when going over bumps, it might be time to replace the lower control arm bushings. Bushings are made of rubber and act as a cushion between metal parts in your suspension. Over time, they can wear out and need to be replaced.
Replacing lower control arm bushings is not a difficult task, but it does require some time and patience.
Start by jacking up your car and removing the wheels. Then, using a wrench or socket, remove the bolts that connect the lower control arm to the frame of the car.
Once the bolts are removed, you will be able to pull out the old bushing. To install the new bushing, simply reverse the process. Slide the new bushing into place and then bolt everything back together.
Be sure to torque all of the bolts to specifications before putting your wheels back on and lowering your car off of the jack stands.