How to Reset Airbag Light on Chevy Malibu

To reset the airbag light on a Chevy Malibu, you will need to disconnect the battery for at least 30 seconds. Once the battery is reconnected, the airbag light should be reset and should not come back on again unless there is another issue with the airbags.

  • Park the Chevy Malibu and turn off the engine
  • Locate the data link connector under the driver’s side of the dash, near where the steering column meets the dash
  • Insert a small flat-blade screwdriver or other similar object into the service connector terminal to depress the locking tab
  • The tab is located on top of 4
  • Remove the screwdriver or object, and insert a paperclip into service connector terminal B (the one without the locking tab)
  • Ground terminal A by touching it with your finger while holding onto metal part of vehicle 6
  • Wait at least two seconds, then remove paperclip from terminal B

How to Reset Service Airbag Light

If your service airbag light is on, it means that there is a problem with the airbag system in your car. This could be due to a number of different reasons, such as a faulty sensor or a loose connection. In any case, it’s important to get the problem fixed as soon as possible, as a malfunctioning airbag can put you and your passengers at risk.

The first step is to check the owner’s manual to see if there is a specific procedure for resetting the service airbag light. If not, then you’ll need to take your car to a qualified mechanic or dealership for diagnosis and repair. Once the problem has been fixed, they will usually be able to reset the light for you.

If you’re comfortable working with cars, then you may be able to reset the light yourself. However, this should only be attempted if you’re absolutely sure that the problem has been fixed and that it’s safe to do so. Otherwise, leave it to the professionals!

How to Reset Airbag Light on Chevy Malibu


How Do I Reset My Airbag Light Manually?

If your car’s airbag light is on, it means that there is a problem with the airbag system and it needs to be reset. You can reset the airbag light yourself, but you will need to have a code reader or scan tool to do so. First, you’ll need to find the diagnostic connector in your car.

This is usually located under the dash, near the steering column. Once you’ve found it, connect the code reader or scan tool to the diagnostic connector and turn on the ignition (but don’t start the engine). The code reader or scan tool will then read any codes that are stored in the airbag system.

Once you have these codes, you can look them up to see what they mean and how to fix them. Once you’ve fixed the problem, you can clear the codes from the system using your code reader or scan tool. Finally, turn off the ignition and disconnect the code reader or scan tool from the diagnostic connector.

How Do You Reset the Airbag Light on a Chevy?

If your Chevy’s airbag light is on, it means there is a problem with the airbag system and it needs to be reset. Here’s how to do it: 1. Disconnect the battery.

This will reset the airbag system and turn off the light. 2. Reconnect the battery after 10 minutes. 3. Start the car and check that the airbag light is off.

If it’s still on, there may be a problem with the airbag system that needs to be checked by a mechanic.

Why Does My Chevy Malibu Says Service Airbag?

Your Chevy Malibu’s airbag system is made up of several components, all of which work together to keep you safe in the event of a collision. The most important part of the system is the airbag itself, which is designed to deploy in a controlled manner in order to cushion your head and body from the force of impact. In order for the airbag to deploy properly, it must be inflated with a small amount of nitrogen gas.

The inflation process is controlled by a sensor that is located in the front of the car, near the steering wheel. This sensor is designed to detect when a collision has occurred, and it will then send a signal to the inflator module. The inflator module contains a small canister of nitrogen gas, which will be released into the airbag when it receives the signal from the sensor.

Will Disconnecting Battery Reset Airbag Light?

If your car’s airbag light is on, it means that there is a problem with the airbag system and it needs to be serviced. Disconnecting the battery will not reset the airbag light. The only way to reset the light is to have the problem fixed by a qualified mechanic.



The airbag light on your Chevy Malibu is designed to come on when there is a problem with the airbag system. If the light comes on, it means that the system needs to be reset. There are a few different ways to reset the airbag light, and the best way will depend on the cause of the problem.

If you’re not sure what caused the light to come on, you can take your car to a dealer or mechanic and have them diagnose the problem. Once you know what needs to be fixed, you can follow these steps to reset the airbag light: 1) Disconnect the battery for 30 seconds.

This will clear any codes that may have been stored in the airbag system. 2) Reconnect the battery and turn on the ignition. The airbag light should now be off.

3) If the light does not turn off after step 2, then there is still a problem with the system and it will need to be repaired before it can be reset.

Leave a Comment

Your email address will not be published. Required fields are marked *