To reset the oil life on a Cadillac SRX, first turn the ignition to the “On” position without starting the engine. Then press and hold the “info” button on the instrument panel for about five seconds. The oil life display will then show 100%.
Release the button and turn the ignition to the “Off” position.
- Open the hood and locate the oil life sensor on the engine
- Disconnect the electrical connector from the sensor
- Remove the sensor from its mounting location
- Install a new sensor in the same location and reconnect the electrical connector
- Start the engine and allow it to idle for several minutes
- Turn off the engine and check for leaks around the new sensor
2014 Cadillac Srx Oil Life Reset
If you own a 2014 Cadillac SRX, then you know that it’s important to keep up with the maintenance of your vehicle. Part of that maintenance includes regularly checking and changing your oil. When you change your oil, it’s also important to reset the oil life indicator so that it accurately reflects how much oil is left in your car.
Here’s a step-by-step guide on how to do just that: First, start the engine and let it run for a few minutes so that the oil can warm up. Next, turn off the engine and locate the “Set/Reset” button.
It should be located on the instrument panel near the speedometer. Once you’ve found it, press and hold down the button until you see “Oil Life 100%” appear on the display screen. This lets you know that the reset has been successful and that your car is now ready for another 5,000 miles before needing an oil change!
How Do I Reset My Oil Life on My Cadillac Srx?
Assuming you would like a blog post discussing how to reset the oil life on a Cadillac SRX:
“How do I reset my oil life on my Cadillac SRX?”
If you need to reset the oil life monitor on your Cadillac SRX, follow these steps:
1. Turn the ignition switch to the ON/RUN position with the engine off. Do not start the engine. 2. Press and hold down the trip odometer button for about five seconds.
The word “OIL” should appear in the odometer reading window. If it does not, turn the ignition switch OFF and repeat this step until “OIL” appears in the odometer reading window. 3. With “OIL” displayed in the odometer reading window, press and release thtrip odometer button repeatedly until you see “% OIL LIFE REMAINING 100.”
This will indicate that you have successfully reset your Cadillac’s oil life monitor!
How Do You Reset the Oil Life on a 2016 Cadillac Srx?
If you need to reset the oil life on your 2016 Cadillac SRX, there are a few different ways that you can do it. One way is to simply hold down the odometer button for about 5 seconds until the “Oil Life” message appears on the display. Once it does, press and release the button again and the oil life will be reset.
Another way to reset the oil life is by using the DIC (Driver Information Center) controls located on the center stack. First, press and release the “Config” button until “Vehicle Settings” appears on the display. Then use the up/down arrow buttons to scroll through the menu until you see “Engine Oil Life”.
Press enter, and then use the up/down arrows to select either 100% or 0%. Press enter again and then exit out of Vehicle Settings. Your oil life should now be reset!
How Do You Reset the Oil Life on a 2013 Cadillac Srx?
Assuming you would like a blog post discussing how to reset the oil life on a 2013 Cadillac SRX:
“How to Reset the Oil Life on a 2013 Cadillac SRX”
If you own a 2013 Cadillac SRX, then you know that it requires regular maintenance in order to keep it running properly.
Part of this maintenance is getting the oil changed regularly. The oil life indicator will let you know when it is time to change your oil. However, sometimes this indicator may need to be reset.
Here is how you can do that: First, open up the hood and locate the data link connector. This should be located near the battery.
Once you have found it, take out the black plastic cover. Then, using a jumper wire, connect terminals A and B together. After that, turn on your ignition but do not start the engine.
You should see either “OIL LIFE RESET” or “CHANGE OIL” appear on your display screen. If you see “CHANGE OIL,” then press and hold down the trip/fuel button for about 5 seconds until you hear a chime sound and see “OIL LIFE 100%.” This means that your oil life has been reset successfully!
How Do You Reset the Oil Life on a 2010 Cadillac Srx?
If you need to reset the oil life on your 2010 Cadillac SRX, there are a few different ways that you can do so. One way is to simply press and hold the “Set/Reset” button on the instrument panel for about five seconds. This should cause the oil life indicator to reset itself.
Alternatively, you can also reset the oil life by disconnecting and then reconnecting the battery. This will cause all of the electronic systems in your vehicle to reboot, including the oil life indicator. Finally, if neither of these methods work, you can always consult your owner’s manual for specific instructions on how to reset the oil life on your particular model of Cadillac SRX.
Cadillac SRX Oil Life Reminder Reset Procedure How to
If you’re driving a Cadillac SRX, it’s important to keep track of your oil life and change your oil when necessary. Here’s how to reset the oil life on your Cadillac SRX:
1. Start the engine and let it run for a few minutes.
2. Turn off the engine and open the hood. 3. Locate the oil dipstick and pull it out. 4. Wipe off the dipstick with a clean cloth or paper towel.
5. Insert the dipstick back into the engine and remove it again to check the oil level. The oil should be at or near the “full” mark on the dipstick. If it’s not, add more oil until it reaches that level.