How to Start a Jeep Cherokee With a Screwdriver

The Jeep Cherokee is a rugged and reliable SUV that can take you anywhere you need to go. But what if your Jeep won’t start? If you find yourself in this situation, don’t panic.

There are a few things you can do to get your Jeep running again. One way to start a Jeep Cherokee with a screwdriver is by using the starter solenoid. This method is quick and easy, and it doesn’t require any special tools or knowledge.

  • Open the hood of your Jeep Cherokee and locate the battery
  • Unscrew the negative terminal from the battery using a screwdriver
  • Touch the end of the screwdriver to the positive terminal on the battery, then touch the other end of the screwdriver to a metal part of the engine
  • Try starting your Jeep Cherokee
  • If it doesn’t start, check that you’re touching the screwdriver to a metal part of the engine that is not painted or insulated in any way

How to Start a 2019 Jeep Cherokee With a Key

If you’re like most people, you probably don’t think too much about how to start your car. You just get in, put the key in the ignition, and turn it on. But what if your car doesn’t have an ignition?

How do you start a 2019 Jeep Cherokee with a key? It’s actually pretty simple. Just insert the key into the slot on the dash and push it until you hear a click.

Then, turn the key to the “on” position and your Jeep will start right up!

How to Start a Jeep Cherokee With a Screwdriver


How Do You Start a Jeep Cherokee Without the Key?

Assuming you’re talking about a newer Jeep Cherokee, there are actually a few ways to start the car without using the key. One way is to use the Jeep’s built-in remote start feature. If your Jeep is equipped with remote start, you can simply press the button on your key fob (usually marked with a picture of a car) and the Jeep will start up.

Another way to start a Jeep Cherokee without the key is to use what’s called an emergency key. The emergency key is a small metal key that’s hidden inside your regular key fob. To find it, just look for a small slot or hole on yourkey fob and insert a paperclip or other thin object into it.

The emergency key should pop right out. Once you have the emergency key, you can insert it into the ignition and turn it like normal to start the car. Of course, if neither of these methods work for you, then you’ll just have to resort to good old fashioned hotwiring.

This isn’t as difficult as it sounds – all you need is a screwdriver and some wire cutters. Just be sure not to damage any wires while you’re doing it!

How Do I Remove the Ignition Lock Cylinder Without a Jeep Cherokee?

Assuming you don’t have the key and there is no power to the Jeep, you will need to remove the steering column covers to access the ignition lock cylinder. Once the covers are off, there are three screws holding the ignition switch in place. Remove these screws and pull the switch out far enough to access the electrical connector.

Disconnect this connector and then remove the final screw holding the ignition lock cylinder in place. You should now be able to pull out the lock cylinder.

Can You Start a Jeep Without the Key Fob?

If you have a Jeep with keyless ignition, you may be wondering if it’s possible to start the car without the key fob. The answer is yes, but it’s not as simple as just using a regular key. Here’s what you need to know about starting a Jeep without the key fob.

To start a Jeep without the key fob, you’ll first need to find the emergency backup key hidden inside the fob. This is usually located under a small panel on the back of the fob. Once you’ve found the emergency backup key, insert it into the ignition and turn it to the “on” position.

The Jeep should now start without any issue. Keep in mind that starting your Jeep without the key fob will disable some of its features, such as power windows and locks. So if you’re planning on driving for an extended period of time, it’s best to bring along your regular key fob just in case.

How Do You Pop an Ignition With a Screwdriver?

If your car has an automatic transmission, you can’t pop the ignition with a screwdriver. This is because the screwdriver will not be able to engage the starter motor. If your car has a manual transmission, however, you can use a screwdriver to pop the ignition.

First, locate the small hole in the center of the ignition switch. Then, insert the tip of the screwdriver into this hole and turn it clockwise. The engine should start and you’ll be able to drive away!

How to remove ignition lock cylinder how to start car without key.


If you’re in a pinch and your Jeep Cherokee won’t start, you can use a screwdriver to get it going. First, locate the positive and negative terminals on the battery. Next, touch the tip of the screwdriver to the positive terminal and then touch the metal part of the car to the negative terminal.

Finally, crank the engine and voila! Your Jeep should start right up.

Leave a Comment

Your email address will not be published. Required fields are marked *