How to Start a Jeep Cherokee Without a Key

If you find yourself in a situation where you need to start your Jeep Cherokee without a key, there are a few methods you can try. Depending on the model year of your Jeep, one method may be more successful than another. For example, older model Jeeps can be started by using a screwdriver to turn the ignition switch.

newer models may require bypassing the security system. Whichever method you try, be sure that the Jeep is in park and the emergency brake is engaged before proceeding.

  • Open the driver’s side door and insert the key into the ignition
  • Turn the key to the “On” position, but do not start the engine
  • Press and release the gas pedal three times within five seconds
  • Start the engine with the key and drive as normal

How to Start a Jeep Grand Cherokee Without a Key

If you’ve ever lost your keys or locked them inside your Jeep Grand Cherokee, you know how frustrating it can be. But don’t worry, there’s a way to start your Jeep without a key. There are two methods to starting a Jeep Grand Cherokee without a key.

The first is by using the emergency key, and the second is by using a screwdriver. To use the emergency key, open the door and insert the key into the slot on the side of the steering column. Then turn the key to the “on” position and press and hold the button on the end of the key for three seconds.

This will start your Jeep’s engine. To use a screwdriver, insert it into the slot on the side of the steering column where the emergency key goes. Then turn it to “on” and press and hold down on the button at the end ofthe screwdriver for three seconds.

This will also start your Jeep’s engine. So now you know two ways to start your Jeep Grand Cherokee without a key!

How to Start a Jeep Cherokee Without a Key


Can You Start a Jeep Without the Key Fob?

No, you cannot start a Jeep without the key fob. The key fob is necessary to start the Jeep as it sends a signal to the vehicle that allows it to start. If you do not have the key fob with you, then you will not be able to start the Jeep.

How Do You Start a 2012 Jeep Without a Key Fob?

Assuming you have a 2012 Jeep with keyless entry and push button start, there are a few ways to start the vehicle without the key fob. If you have the key fob within close proximity of the car, simply press the Start/Stop button while depressing the brake pedal. The Jeep will start and run as long as the key fob is within range; however, if it moves out of range, the engine will shut off.

There is also an emergency backup method for starting the vehicle if your key fob is completely lost or non-functional. Locate the Start/Stop button on the dashboard (it should have a red ring around it) and press and hold it for three seconds. This will put the Jeep into accessory mode; then, press and release the Start/Stop button again without depressing either pedal.

The Jeep should start. Note that this backup method will only work temporarily – once you turn off or restart the Jeep, you’ll need to use a functional key fob to restart it.

How Do You Start a 2015 Jeep Cherokee With the Key?

Assuming you have a standard 2015 Jeep Cherokee: To start the car, insert the key into the ignition. Once the key is inserted, turn it to the “On” position.

This will cause the car’s electronics to turn on and prepare the engine for starting. Next, press down on the brake pedal and then press the start/stop button. The engine should now be running.

How Can I Start My Car Without the Remote Key?

If you have a keyless entry system on your car, you may be wondering what to do if the remote key fob goes dead. Fortunately, it’s easy to start your car without the remote key. All you need is the physical key that came with your car.

Here’s how to do it: 1. Locate the physical key that came with your car. It should be somewhere in your house, like in a drawer or safe.

If you can’t find it, try calling a locksmith or dealership for a replacement. 2. Once you have the physical key, approach your car and locate the small black button on the door handle. This is the emergency release button for the lock.

Press and hold this button while you insert the physical key into the door lock cylinder. 3. Turn the physical key until you hear a clicking sound, then remove it from the lock cylinder and keep holding down on the emergency release button. This will allow you to open up your door even though there’s no power going to it from the remote key fob.

4. Once inside your car, put the physical key into ignition and turn it to “On.” Your car should start right up without any issue!



If you’re unfortunate enough to lose your Jeep Cherokee key, or it breaks, don’t worry—you can still start your car. All you need is a screwdriver and a few minutes. Here’s how:

First, locate the screws on the lower portion of the steering column. There are two of them, and they’re usually covered by a plastic cap. Remove the caps and screws with your screwdriver.

Next, pull down on the lower portion of the steering column until it comes loose. You should now see a black box with wires coming out of it—this is the ignition switch. Locate the wire that’s labeled “ACC” (it stands for accessory).

This wire should have power even when the key is not in the ignition. Use your screwdriver to touch this wire to any metal part of the car—this completes the circuit and will allow you to start your Jeep Cherokee without a key.

Leave a Comment

Your email address will not be published. Required fields are marked *