How to Turn on Uhaul Headlights

How to Turn on Uhaul Headlights

As the sun dips below the horizon and darkness envelops the world around you, having properly functioning headlights on your U-Haul vehicle becomes an essential safety measure. Whether you’re embarking on a cross-country move, hauling precious cargo, or setting off on a memorable road trip, understanding how to operate the headlights on your U-Haul is of utmost importance.

In this comprehensive guide, we will walk you through the simple steps to illuminate your U-Haul’s headlights effectively, ensuring clear visibility and safe travels throughout your journey. From the fundamental functions of the dashboard controls to essential tips for driving in low-light conditions, we’ve got you covered. So, let’s shed some light on the subject and embark on this enlightening journey of learning how to turn on U-Haul headlights with ease and confidence.

  • Locate the headlight switch: The headlight switch is usually located on the left side of the steering wheel column. Depending on your Uhaul model, it may be a small knob or lever that you pull to turn on and off your headlights
  • Turn the switch: Once you have located the headlight switch, simply move it in an upward direction until it clicks into place; this should indicate that they are now turned “on”
  • Check to make sure lights are illuminated: When turning on or off any electrical item inside a vehicle, always double check to make sure everything is working properly before driving away. To do this with regard to headlights, simply walk around your Uhaul and ensure both driver and passenger side headlights are illuminated from front view
How to Turn on Uhaul Headlights


How Do You Turn the Lights on in a U-Haul?

To turn the lights on in a U-Haul, insert the key into the ignition and turn it to the “on” position. This will cause all of the lights inside and outside of the truck to come on. Additionally, most U-Hauls have an interior light switch that can be used to illuminate any dark areas within the cab or cargo area.

With these two steps, turning on all of your lights while renting a U-Haul is easy and intuitive! By taking just a moment to familiarize yourself with this process before you set off for your next move or adventure, you can greatly reduce stress as well as ensure safety during night trips or dockside deliveries. With these simple steps, staying safe and illuminated has never been easier when using a U-Haul rental truck!

Where is the Light Switch on a U-Haul Truck?

The light switch on a U-Haul truck is located on the driver’s side of the dashboard. It is generally turned off when the truck is not in use, and turning it back on will activate all interior lighting. For drivers unfamiliar with this process, it can be easy to overlook or forget about during their rental experience—so if you’re ever unsure where your light switch might be located, just check near the driver’s side of the dashboard!

In addition to helping you locate your light switch easily, understanding how to access and operate one can help make for an overall better rental experience—from being able to find things quickly at night to avoiding any potential safety hazards.

How Do You Turn on the Hazard Lights on a U-Haul Van?

To turn on the hazard lights on a U-Haul van, locate the “Emergency Flashers” switch near the bottom of the dashboard. Press and hold down this button for several seconds until you hear a clicking noise indicating that your hazards have been activated. A small indicator light should also appear in the same area to confirm that these flashing lights are active.

When driving a U-Haul van, it is important to know how to activate your hazard lights in order to alert other drivers of potential danger. Hazard lights signal that you are either stopped or moving slowly, so they can be used when changing lanes on highways or while maneuvering through busy city streets. They can also be used when parked along roadsides if there is an emergency situation requiring attention from first responders—such as having car trouble, needing roadside assistance, or experiencing medical distress—so being able to quickly turn them on could help save lives!

How Do You Turn off the Tow Haul Light on a U-Haul?

To turn off the tow haul light on a U-Haul, locate the “Tow Haul” switch in the vehicle and press it until it clicks to deactivate. The Tow Haul mode is designed to make driving while pulling a trailer or other heavy load easier. It adjusts the transmission shifting points and engine braking power to provide better performance when hauling something behind you.

Turning off this feature will help ensure that your U-Haul is operating at its best efficiency when not being used for towing. After turning off tow haul mode, take some time to familiarize yourself with how your U-Haul drives without this setting enabled. This will help you identify any changes in performance that come from disabling this feature so that you can adjust accordingly as needed for future trips!

U-Haul Van Cabin light switch

Related Questions About to Turn on Uhaul Headlights

How to Turn off U Haul Headlights

If you need to turn off the headlights of your U-Haul vehicle, there are a few steps that you can take. First, make sure that your vehicle is in park and that the engine is turned off. Then, locate the headlight switch on your dashboard or center console.

This will usually be labeled “headlights” or “low beams” and should have an accompanying knob or button to click into the “off” position. Once this has been done, your headlights should be successfully turned off.

How to Turn on U-Haul Truck

Turning on a U-Haul truck is easy and straightforward.

  • First, make sure that the transmission selector switch is in park mode, then press firmly on the brake pedal.
  • Next, turn the key to the “on” position; this will cause all of your dashboard lights to illuminate and allow you to start up your U-Haul truck’s engine.
  • Finally, press down on the accelerator lightly until you hear or feel the engine begin running before releasing it again once it has started successfully.

U Haul Cargo Light Switch Location

The cargo light switch on a U Haul is located on the side of the rear panel, just above where the latch for opening and closing the door would be. It controls whether or not your lights turn on when you open up your cargo area. This makes it easier to see inside while loading and unloading items in dark locations or at night.

U-Haul Cabin Light Won’T Turn off

If you’ve recently rented a U-Haul and the cabin light won’t turn off, it’s likely due to a faulty or damaged switch. Fortunately, this is an easy problem to fix. All you need to do is replace the existing switch with one that works properly.

There are plenty of online tutorials available on how to replace the switch yourself; however, if you’re not comfortable doing so, contact your local U-Haul store for help getting it fixed.


Overall, turning on Uhaul headlights is a simple process that can be done with just the flip of a switch. All you have to do is locate and activate the headlight switch located in your cab, or outside of it depending on what type of truck you are driving. Once this is done, your headlights will be turned on and ready for use during night time travels.

With these easy steps, you’ll never need to worry about feeling lost or stranded again!

Leave a Comment

Your email address will not be published. Required fields are marked *