How to Use Scissor Jack for Car

Scissor jacks are a type of jack that is often used to raise the body of a vehicle. They are usually found in the trunk of a car. Most scissor jacks have two handles that can be operated independently, which allows them to be raised or lowered with ease.

When using a scissor jack to raise your car, be sure to place it on a level surface and use caution when operating the handles.

  • Open the scissor jack and place it under the car on a flat, level surface
  • Find a spot on the underside of the car where you can place the jack without it slipping off, such as next to a frame rail
  • Pump the handle of the scissor jack to raise the vehicle until the tire is off the ground
  • Place a Jack Stand under the car for extra support, then lower the scissor jack down until it’s no longer touching the car

How to Use a Scissor Jack to Raise Your Car, Truck, or SUV

How to Use Scissor Jack With Hook

If you’re looking for an easy and effective way to lift your vehicle, a scissor jack is a great option. A scissor jack is designed to fit under the frame of your car and can be used with a hook to provide added stability. Here’s how to use a scissor jack with a hook:

1. Position the scissor jack under your vehicle’s frame. Make sure that the base of the jack is level so that it doesn’t tip over when in use. 2. Attach the hook onto the provided slot on the top of the jack.

3. Use the crank handle to slowly lift your vehicle off of the ground. The further you turn the handle, the higher your vehicle will be lifted. 4. Once your vehicle is at your desired height, stop cranking and make sure that the jack is locked into place so that it doesn’t lower unexpectedly.

How to Use Scissor Jack for Car


Can I Use a Scissor Jack to Lift a Car?

If you’re looking to lift a car with a scissor jack, the answer is unfortunately no. Scissor jacks are not designed to support the weight of an entire vehicle – they are only meant for small, temporary lifts. If you try to use a scissor jack to lift a car, it could collapse and cause serious injury.

So if you need to lift your car, be sure to use a hydraulic floor jack instead.

How Does a Scissor Lift Jack Work?

A scissors lift jack is a type of mechanical device that is used to raise or lower an object by applying force to it in a scissoring motion. The most common use for a scissors lift jack is to raise or lower a vehicle, such as a car or truck. The way a scissors lift jack works is by using two opposing cylinders that are connected at the top and bottom by cross-bars.

When these cylinders are extended, they push against each other, which in turn raises the object that is on top of them. To lower the object, the cylinders are simply retracted back into their original position. Scissors lift jacks can be operated manually or via hydraulic power.

Manual models typically have a crank handle that is used to extend and retract the cylinders, while hydraulic models use fluid pressure to do the same thing. Hydraulic models are generally much easier to use than manual ones, but they can be more expensive. No matter what type of scissors lift jack you use, it’s important to read the instructions carefully before operating it.

This will help ensure that you use the device correctly and avoid any accidents.

How Do You Put a Car on a Jack Stands With a Scissor Jack?

If your car has a scissor jack, you can use it to put the car on jack stands. First, find a level spot on the ground to park the car. Then, chock the wheels so the car won’t roll while it’s on the jack stands.

Place the scissor jack under one of the frame rails and crank it up until the wheel is off the ground. Do this for all four corners of the car. Once all four wheels are off the ground, you can lower each corner onto a jack stand.

Make sure that each jack stand is placed underneath a solid part of the frame so it will support the weight of the car safely.

How Do You Jack Up the Front of a Car With a Scissor Jack?

If you need to jack up the front of your car, you can do so using a scissor jack. Here’s how: 1. Park your car on level ground and engage the parking brake.

Place a block behind one of the rear wheels to prevent the car from rolling while it’s jacked up. 2. Locate the scissor jack points on your car – these are usually located near the corners of the frame. 3. Place the scissor jack under one of the points and crank it until the wheel is lifted off the ground.

Repeat for the other side. 4. Once both wheels are off the ground, you can place jack stands under each side for added support.

Can I Use a Scissor Jack to Change Oil?

You can use a scissor jack to change your oil, but there are some things you should keep in mind. First, make sure that the vehicle is on level ground and that the scissor jack is rated for the weight of your vehicle. Second, place the jack under the vehicle at a point where it will be stable, such as under the frame or near a wheel well.

Third, use caution when lifting the vehicle with the jack; if it tips over, it could cause serious injury. Finally, once the vehicle is lifted, be sure to support it with jack stands before working on it.


If you’re a car owner, it’s important to know how to use a scissor jack. This handy tool can be used to lift up your car so that you can change a tire or perform other maintenance tasks. Here’s a step-by-step guide on how to use a scissor jack:

1. Park your car on level ground and set the parking brake. You don’t want your car to move while you’re lifting it up! 2. Find the scissor jack and place it under the frame of your car, near the wheel that you want to lift up.

3. Use the handle of the jack to slowly turn clockwise, which will cause the arms of the jack to extend and lift up the vehicle. 4. Keep turning until the wheel is off the ground and then set the jack in place so it doesn’t collapse. 5. Now you can change your tire or do whatever else you need to do!

When you’re finished, just reverse these steps and lower your car back down onto all four wheels.

Leave a Comment

Your email address will not be published. Required fields are marked *