What Causes a Steering Angle Sensor to Go Bad

A steering angle sensor is responsible for detecting the direction and degree of a vehicle’s turn. It does this by monitoring the rotation of the steering wheel and communicating with other components in an onboard computer, such as the ABS system. Common causes of a bad steering angle sensor include moisture damage, wiring issues, or physical damage to either the sensor itself or its connection points.

Moisture can corrode electrical components over time, leading to shorts and loss of communication between components. Wiring problems can cause improper voltage readings which prevent accurate position detection from occurring. Physical damage may be caused due to age and wear-and-tear on both internal parts as well as external connection points that are prone to vibrations when driving over rough terrain or potholes.

A steering angle sensor is an important part of a vehicle’s stability and control system. It measures the angle of the wheels relative to the car’s body, allowing for more precise handling and safer driving. However, if it malfunctions or fails due to age or damage, it can cause serious safety issues and driver frustration.

Common causes of a bad steering angle sensor include physical damage from road debris, worn-out wiring harnesses due to long term use, water intrusion into its electrical components, as well as programming errors in its software. To prevent such problems, regular inspection and maintenance is recommended.

Can You Drive With a Bad Steering Angle Sensor

Driving with a bad steering angle sensor can be dangerous and should be avoided if possible. The steering angle sensor is an important safety feature in modern cars as it helps control the stability of the vehicle, allowing for better handling when you turn corners or make sharp movements. If this part fails, your car may become difficult to control and could put yourself and other drivers at risk.

It’s best to have your steering angle sensor checked by a mechanic as soon as possible if you suspect there might be an issue.

What Causes a Steering Angle Sensor to Go Bad

Credit: mycarmakesnoise.com

What Causes a Faulty Steering Angle Sensor?

A faulty steering angle sensor can cause a range of issues for the driver, including difficulty with steering and loss of control over their vehicle. The steering angle sensor is responsible for measuring the angle of the steering wheel and communicating that information to other systems in the car such as ABS, traction control, stability control, etc. It works by sending electrical signals to these other systems so they know how much power needs to be sent to each individual wheel depending on what direction you are turning.

A faulty or malfunctioning Steering Angle Sensor (SAS) can result from incorrect installation or calibration due to improper maintenance on the vehicle’s suspension system which can lead it becoming misaligned. This causes inaccurate readings when attempting turns and will make your car difficult or impossible to steer properly. Additionally, any physical damage done to this part could potentially create problems as well – if you have recently been involved in an accident there is a chance that wiring within this area has become damaged resulting in a fault SAS reading being sent out from your vehicle.

What are the Symptoms of a Bad Angle Sensor?

A bad angle sensor can cause a variety of issues in your vehicle, from engine misfires to rough idling. Common symptoms of a bad angle sensor include difficulty starting the engine, stalling or hesitation when accelerating, and reduced fuel economy. Other signs may be illuminated warning lights on the dashboard such as Check Engine or ABS light due to an imprecise signal being sent to onboard computers regarding wheel speed and suspension position.

Additionally there could be an abnormal amount of vibration coming through the steering wheel due to incorrect alignment readings causing tire wear and noise levels that are higher than normal while driving. It is important to note that all these problems can also be caused by other components in your car so it’s best to have an expert diagnose before replacing parts unnecessarily.

Does Disconnecting Battery Reset Steering Angle Sensor?

The answer to this question is not a simple yes or no. The resetting of a steering angle sensor depends on the type of vehicle and model you have, as well as the specific issues that are causing it to malfunction. It may be possible to reset your steering angle sensor by disconnecting the battery in some vehicles, while other models may require more advanced techniques such as reprogramming or recalibration.

If your car has an electronic stability control system (ESC) or antilock brakes (ABS), disconnecting the battery can also disrupt these systems, so make sure you understand what might happen before attempting any repairs. In general, most experts recommend taking your car into a professional automotive technician for diagnosis and repair if you suspect there is an issue with your steering angle sensor – they will know exactly how to perform the necessary tests and repairs without risking further damage.

Can You Break a Steering Angle Sensor?

When it comes to steering angle sensors, they are a very important part of the car’s electronic stability control system. These sensors measure how far the front wheels have turned and how much pressure is being applied to them as you turn the wheel. This information helps your car understand when it needs to add more power or traction on one side or another so that your vehicle maintains its balance and keeps you safe while driving.

Unfortunately, like any other part of a car, these sensors can become damaged over time due to wear and tear from everyday use. It is possible for these components to break if they suffer too much damage or impact from an accident; however, this is not always the case as they are designed with durability in mind. If you find yourself in a situation where your steering angle sensor has gone bad, then it’s best that you get it replaced right away before any further damage is done!

How to Diagnose a Bad Steering Angle Sensor


In conclusion, a steering angle sensor can go bad for a variety of reasons. It can become faulty due to wear and tear on its electrical components, or it may fail because of an obstruction in the system. Whatever the cause, it’s important to diagnose and repair the issue as soon as possible to prevent any further damage or safety issues.

By understanding what causes these sensors to go bad, you can take proactive steps towards maintaining your vehicle’s steering angle sensor and preventing future problems with it.

Leave a Comment

Your email address will not be published. Required fields are marked *