What is a 4/6 Drop

A 4/6 drop is a term used to describe the lowering of a vehicle’s suspension. The “4” refers to the front of the vehicle being lowered four inches, and the “6” refers to the rear of the vehicle being lowered six inches. This type of suspension is often used on trucks and SUVs in order to give them a more aggressive look, as well as improve handling and performance.

There are several methods that can be used to achieve a 4/6 drop, such as coil springs, airbags, or hydraulic jacks.

A 4/6 drop is a term used to describe the lowering of a vehicle’s suspension. The front end is lowered four inches, and the rear end is lowered six inches. This type of suspension setup is popular among car enthusiasts who want their vehicles to have a more aggressive look.

It can also improve handling and performance, although it may sacrifice some ride comfort.

4/6 Drop Kit Obs

A 4/6 drop kit lowers the truck four inches in the front and six inches in the rear. This is a very popular suspension choice among truck enthusiasts, as it provides a significant drop without sacrificing ride quality or performance. There are many different brands and styles of 4/6 drop kits available on the market, so it is important to do your research to find the best one for your truck.

How Low Should I Drop My Truck?

When it comes to lowering your truck, there are a few things you need to take into consideration. First, you need to decide how low you want to go. Second, you need to consider what kind of look you’re going for.

And third, you need to make sure that your truck can still handle the roads and terrain after it’s been lowered. So, how low should you drop your truck? It really depends on what you’re looking for and what type of truck you have.

If you have a smaller truck, then dropping it a few inches shouldn’t be a problem. But if you have a larger truck, then you might want to consider dropping it a bit more. It all just depends on your preference and what look you’re going for.

As far as the handling goes, lowering your truck will definitely affect how it drives. So keep that in mind when making your decision. You don’t want to lower it so much that it can’t handle the roads anymore.

But at the same time, lowering it just enough can give it a nice aggressive look while still being able to perform well on the streets and off-road. In the end, there is no right or wrong answer when it comes to deciding how low to drop your truck. Just make sure that whatever decision you make is one that takes into consideration all of the factors involved.

That way, you’ll be happy with the results both aesthetically and performance-wise.

How Much Does a Flip Kit Lower a Truck?

A flip kit is a device that is used to lower the back end of a truck. This is accomplished by flipping over the rear axle, which in turn lowers the back end of the vehicle. The amount that a flip kit lowers a truck can vary depending on the make and model of the truck, as well as the size of the kit.

Generally speaking, however, most kits will lower a truck by around two to four inches.


In a 4/6 drop, the front axle is lowered four inches and the rear six. This is done by using two-inch lowering blocks in the rear and either coil springs or spindles in the front. The advantage to this setup is that it gives the truck a level stance while also providing more clearance for larger tires.

It’s a popular choice for those who want to improve both the look and performance of their truck.

Leave a Comment

Your email address will not be published. Required fields are marked *