What Size Lift for 35 Inch Tires Silverado

The Silverado is a great truck, and it can tow a lot. But if you’re thinking about putting 35 inch tires on your Silverado, you need to make sure you have the right size lift. Otherwise, your truck could end up being too tall or too short.

So how do you know what size lift to get for 35 inch tires? Here are a few things to consider.

If you’re looking to upgrade your tires on your Silverado, you might be wondering what size lift you need to accommodate 35 inch tires. The good news is that a 3 inch lift will give you plenty of clearance for 35 inch tires. With a 3 inch lift, you’ll have no problem clearing obstacles and tackling rough terrain.

So if you’re looking to upgrade your tires and want to make sure you have enough clearance, a 3 inch lift is the way to go.

Minimum Lift for 35” Tires Silverado 2500

Are you thinking about upgrading your tires on your Silverado 2500HD? If so, you may be wondering what the minimum lift is that you need in order to accommodate 35” tires. The answer to this question depends on a few factors, such as the offset of your wheels and whether or not you plan on trimming your fenders.

In general, though, most people find that a 3”-4” lift is necessary in order to avoid any rubbing issues. If you go with a smaller lift, you may find that your tires rub when turning or going over bumps. This can cause premature wear and tear on both your tires and your truck itself.

A bigger lift, on the other hand, can make your truck look “staged” and possibly affect its resale value down the line. Ultimately, it’s up to you to decide what size lift is right for your needs. If you want to err on the side of caution, a 4” lift should give you plenty of clearance for 35” tires without making too much of an impact on the appearance or performance of your truck.

How Much of a Lift Do I Need for 35 Inch Tires?

If you’re looking to add 35-inch tires to your vehicle, you’ll need a suspension lift to accommodate the larger size. Depending on the make and model of your car or truck, you may need a 3-inch, 4-inch, or even 6-inch lift. Of course, the amount of lift needed will also depend on the width of the tire and how much ground clearance you’re looking for.

In general, a 3-inch suspension lift will provide enough room to fit 35-inch tires without rubbage. A 4-inch lift will give you some additional clearance and allow for slightly wider tires. And a 6-inch lift will give you plenty of room to go even bigger with your tire choice.

Keep in mind that adding a suspension lift will also change the way your vehicle handles and drives. So be sure to do your research and consult with an expert before making any modifications to your ride.

Can You Fit 35 Inch Tires on a 3 Inch Lift?

35 inch tires can fit on a 3 inch lift, but there may be some rubbing at full turn with a stock fender. If you have aftermarket fenders or flares, then you should have no issues. Some people trim their front fenders to prevent any rubbing.

Will 35S Fit With a 2 Inch Lift?

It is a common question among Jeep Wrangler owners – will 35s fit with a 2 inch lift? The answer is…it depends. There are many factors that come into play when determining if 35 inch tires will fit on your Jeep Wrangler with a 2 inch lift.

These include the width of your tires, the offset of your wheels, and the type of suspension lift you have. Generally speaking, however, most 2 inch suspension lifts will accommodate 35 inch tires without any issues. So if you’re looking to upgrade to 35s and have a 2 inch lift, chances are good that they will fit just fine.

How Much Height Does 35 Tires Add?

If you’re looking to add some height to your vehicle, 35 tires may be a good option. But how much height will they actually add? It depends on a few factors, including the width of the tire and the size of the wheel.

Generally speaking, though, you can expect 35 tires to add about 2-3 inches of height to your vehicle.


If you’re looking to upgrade your tires on your Silverado, you’ll need to decide what size lift you need. A 35 inch tire will require a 3-4 inch lift, depending on the brand and model of tire. You may also need to add a body spacer to clear the fender well.

Leave a Comment

Your email address will not be published. Required fields are marked *